Dimplex 2kw Wall Mounted Downflow Fan Heater with Pullcord and Timer - White | FX20VEW, output, 7-day scheduling, 2-year guarantee, BEAB approved, FX20VEW
Description
2kW output - selectable 1kW or 2kW at installation ConfigR app - seven-day scheduling from your smartphone Precise thermostat - 7°C to 32°C temperature range 30-minute run-back timer - adjusts in 5-minute increments Pull cord operation - quick manual on/off control Downflow air direction - warms from floor level upward Retrofit ready - same footprint as older Dimplex FX models BEAB approved and CE marked - independently certified IP22 rated - suitable for bathroom and damp-area installation 2-year guarantee included Compact wall-mounted build - 242 x 229 x 109 mm, 1.09 kg Flame-retardant nylon casing with thermal overload cut-out Warranty: 2 Years Dimensions: 242 x 229 x 109 mm Dimplex FX20VEW Wall Mounted Downflow Heater with ConfigR App and Timer Fast, Directed Warmth for Smaller Rooms: The Dimplex FX20VEW delivers up to 2kW of heat directed downward from the wall, circulating warmth through bathrooms, cloakrooms, kitchens, and utility areas without taking up any floor space. A selectable 1kW or 2kW output lets installers set the appropriate level for the room during installation. Pull Cord and 30-Minute Run-Back Timer: A pull cord provides quick manual control, while the built-in electronic timer automatically switches the heater off after a period of up to 30 minutes, adjustable in 5-minute increments. This prevents the heater being left on accidentally and helps keep energy use in check. ConfigR App for Seven-Day Scheduling: The FX20VEW is compatible with the Dimplex ConfigR app, allowing users or installers to programme a seven-day heating schedule, set precise temperatures between 7°C and 32°C, configure run-back durations, and manage boost functions from a smartphone. This makes it straightforward to match heating to actual occupancy patterns without manual adjustment each day. Retrofit-Ready Design: The FX20VEW shares the same footprint and fixing-point layout as earlier Dimplex FX heaters, making it a direct retrofit replacement for existing installations. Two upper keyhole slots and a third securing fixing hole are used for wall mounting, with a recommended installation height of 1.8m. The double-insulated, flame-retardant nylon casing meets BS 7671 wiring regulations and European Safety Standard EN60335:2-30. Shop the full Appliances range from Heavins.ie, with delivery available across Ireland. Key Features 2kW Heat Output - selectable 1kW or 2kW set at installation to suit the room. ConfigR App Compatible - seven-day scheduling, temperature control from 7°C to 32°C, and boost management via smartphone. 30-Minute Run-Back Timer - adjustable between 5 and 30 minutes; switches off automatically to prevent accidental use. Pull Cord Operation - convenient manual on/off without needing to reach a wall switch. Downflow Air Direction - heated air directed downward to warm the room from floor level upward. Retrofit Compatible - identical footprint and fixing points to earlier Dimplex FX models for easy replacement. Flame-Retardant Nylon Casing - double-insulated, self-extinguishing grade nylon construction. Manually Resettable Thermal Cut-Out - overload protection with thermal fuse for added safety. Neon Indicator - shows when the heater is active. BEAB Approved - independently tested and certified; CE marked and ERP Directive 2025 Lot 20 compliant. Specifications Brand: Dimplex Model: FX20VEW Colour: White Heat Output: 2kW (selectable 1kW or 2kW at installation) Voltage: 230-240V ~ IP Rating: IP22 Timer: Electronic run-back timer, 5-30 minutes adjustable App Compatibility: Dimplex ConfigR App (seven-day timer, 7°C-32°C thermostat, boost) Safety Cut-Out: Manually resettable thermal overload cut-out and thermal fuse Mounting Height (recommended): 1,800mm Casing: Double-insulated flame-retardant self-extinguishing nylon Standards: EN60335:2-30, EN55014:1, EN55014:2, EN61000:3-2, BS 7671 Certifications: BEAB Approved, CE Marked, ERP Directive 2025 Lot 20 Compliant Dimensions (HxWxD): 242 x 229 x 109 mm Weight: 1.092 kg Warranty: 2 Years What's Included in the Box Dimplex FX20VEW Downflow Fan Heater (White) Fixing hardware Instruction document Note: mains cable is supplied by the installer and is not included Setup and Care Installation: Wall mounting requires a qualified electrician in line with BS 7671 wiring regulations. Two upper keyhole slots and a third securing fixing hole are provided; the recommended installation height is 1.8m from the floor. For existing FX-series installations, the FX20VEW uses the same fixing-point layout, so the new unit fits directly onto existing wall fixings. ConfigR App Setup: Download the Dimplex ConfigR app on a compatible smartphone and follow the in-app pairing instructions to connect to the FX20VEW. Once paired, heating schedules, temperature setpoints, and run-back durations can be adjusted remotely without any manual adjustment at the heater itself. Timer Operation: Pull the cord to activate the heater; the run-back timer duration is set using the timer dial and